Special Tools; Special Tool For Tractor - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

5. SPECIAL TOOLS

[1] SPECIAL TOOL FOR TRACTOR

Pinion Shaft Remover
Application :Use for removing a pinion shaft.
A 106 mm (4.17 in.)
B 350 mm (13.078 in.)
C 6 mm (0.24 in.)
D 90 mm (3.54 in.)
E 10 mm (0.39 in.)
F 40 mm (1.57 in.)
G 10 mm (0.39 in.)
H 35.6 mm (1.40 in.)
I 36 mm (1.42 in.)
J 41.6 mm (1.64 in.)
K Part code No. 3A201-4130 nut
L M27 x 1.5
M M10 x 1.25
Shuttle Case Assembling Stand
Application :Use for assembling the shuttle case.
A 300 mm (11.81 in.)
B 175 mm (6.89 in.)
C 195 mm (7.68 in.)
D 85 mm dia. (3.35 in. dia)
E 75 mm dia. (2.95 in. dia.)
F 21 mm dia. (0.83 in. dia.)
G 150 mm (5.91 in.)
H 75 mm (2.95 in.)
I 220 mm (8.665 in.)
J 80 mm (3.15 in.)
K 75 mm (2.95 in.)
T1 15 mm (0.59 in.)
T2 15 mm (0.59 in.)
Clutch Tool B
Code No : 07916-53041
Application : Use for mounting the clutch to the flywheel.
(1) Gauge Ring
(2) Center Bar
NG13
GENERAL
0000003112E
0000003609E
(3) Centering Guide
0000003634E
KiSC issued 04, 2006 A