Tightening Torques - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

1. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
Hydraulic pipe mounting screw
Hydraulic pump assembly mounting screw and nut
Main delivery pipe and return pipe retaining nut
Turning delivery hose retaining nut
Steering controller mounting screw
Tie-rod end nut
Power steering hose retaining nut
Cylinder cover
Tie-rod joint and steering cylinder mounting screw
Item
17.7 to 20.6
23.6 to 27.4
46.6 to 50.9
24.5 to 29.4
48.1 to 55.9
77.5 to 90.2
24.5 to 29.4
48.1 to 55.8
166.6 to 196.0
N7-S1
STEERING
ft-lbs
1.8 to 2.1 13.0 to 15.2
2.4 to 2.8 17.4 to 20.2
4.8 to 5.2 34.4 to 37.6
2.5 to 3.0 18.1 to 21.7
4.9 to 5.7 35.4 to 41.2
7.9 to 9.2 57.2 to 66.5
2.5 to 3.0 18.1 to 21.7
4.9 to 5.7 35.5 to 41.2
17.0 to 20.0 122.9 to 144.6
0000003539E
KiSC issued 04, 2006 A