Servicing - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

(2) Servicing

4WD / Bi-speed Turn Clutch Disc Wear
1. Measure the thickness of clutch disc with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory spec.
Thickness of clutch disc
Allowable limit
4WD / Bi-speed Turn Drive Plate Wear
1. Measure the thickness of drive plate with vernier calipers.
2. If the thickness is less than the allowable limit, replace it.
Factory spec.
Thickness of drive plate
Allowable limit
Flatness of 4WD / Bi-speed Turn Piston and 4WD / Bi-speed Turn
Drive Plate
1. Place the part on a surface plate.
2. Check it unable to insert a feeler gauge (allowable limit size)
underneath it at least four points.
3. If the feeler gauge can be inserted, replace it.
Flatness of 4WD / Bi-
Allowable limit
speed turn piston
Flatness of 4WD / Bi-
Allowable limit
speed turn drive plate
N3-S25
TRANSMISSION
1.70 to 1.90 mm
0.067 to 0.075 in.
1.55 mm
0.061 in.
0000003484E
1.15 to 1.25 mm
0.045 to 0.049 in.
1.10 mm
0.043 in.
0000003485E
0.15 mm
0.006 in.
0.30 mm
0.012 in.
0000003486E
KiSC issued 04, 2006 A