Disassembling And Assembling; Separating Rear Axle Case From Transmission Case; Disassembling Brake Case - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Separating Rear Axle Case From Transmission Case

Refer to "Separating Rear Axle Case From Transmission Case" in "4. REAR AXLE" section.

(2) Disassembling Brake Case

Brake Cam Plate
1. Remove the return spring (1).
2. Remove the brake cam plate (2).
(When reassembling)
Apply grease to the brake ball seats.
excessively.)
(1) Return Spring
Brake Shaft, Brake Disc and Brake Plate
1. Draw out the brake shaft (4) with brake disc (7).
2. Remove the external snap ring (5).
3. Remove the steel plate (6).
(When reassembling)
Place the brake discs (7) so that the holes "A" of the all discs
should be overapped.
(1) Collar
(2) Pin
(3) Brake Plate
(4) Brake Shaft
(5) External Snap RIng
N5-S4
BRAKES
0000003513E
(Do not grease
(2) Brake Cam Plate
0000003514E
(6) Steel Plate
(7) Brake Disc
A : Hole
0000003515E
KiSC issued 04, 2006 A