Tightening Torques - Kubota ME8200DTN Workshop Manual Supplement

ME8200DTN, WSM

3. TIGHTENING TORQUES

Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10.)
ROPS frame (L and R)
Foldable ROPS
Power steering hose retaining nut
Starter's terminal B mounting nut
Bonnet support mounting screw
Support frame mounting screw
Engine and clutch housing mounting screw, nut
Engine and clutch housing mounting stud bolt
Clutch mounting screw
Release fork setting screw
Item
196.1 to 225.6
29.4 to 49.0
24.5 to 29.4
8.8 to 11.8
48.1 to 55.8
48.1 to 55.8
77.5 to 90.2
38.2 to 45.1
23.5 to 27.5
166.7 to 186.3
N2-S3
ft-lbs
20.0 to 23.0 144.7 to 166.4
3.0 to 5.0 21.7 to 36.2
2.5 to 3.0 18.7 to 21.7
0.9 to 1.2 6.5 to 8.7
4.9 to 5.7 35.5 to 41.2
4.9 to 5.7 35.5 to 41.2
7.9 to 9.2 57.1 to 66.5
3.9 to 4.6 28.2 to 33.3
2.4 to 2.8 17.4 to 20.3
17.0 to 19.0 123.0 to 137.4
0000003424E
KiSC issued 04, 2006 A
CLUTCH