Configuring The Commission List - Emerson IEC 62591 Instruction Manual

IEC 62591 Wireless Interface Instruction Manual (for ControlWave Micro)
listStatus := LIST100_1.odiStatus;
If you need to support the maximum number of devices – 100 – you can
do this by chaining together two LIST100 function blocks. To do this,
you just use the same iiListNumber parameter for each; that connects
the two to allow for a 200 element list.

3.2.7 Configuring the Commission List

When the Field Link detects a wireless device that can be included in
the network, it adds information about that device to the Active List.
Process data from the device is only collected if it has a matching tag
name in the Commission List, and if its decommission flag is FALSE –
only then will its data be collected.
Revised October-2019 Configuration and Commissioning 3-13