Emerson IEC 62591 Instruction Manual page 18

IEC 62591 Wireless Interface Instruction Manual (for ControlWave Micro)
2-8
From the Manual Setup Menu, double-tap Wireless.
5.
Manual Setup
1 Wirelessnnnn nnnnnnnnnnnnnnnnnnnn
2 Process Sensor
3 Percent of Range
4 Device Temperatures
5 Device Information
6 Device Display
7 Other
From the Wireless Menu, double-tap either:
6.
a. Network ID to set the Network ID using the on-screen keypad.
b. Join Device to Net... to set the Join Key using the on-screen
keypad.
Wireless
1 Network ID
2 Join Device to Net...
3 Broadcast Rates
4 Configure Broadca...
5 Power Mode
6 Power Source
7. From the Manual Setup Menu (shown in Step 7), double-tap Device
Information to call up the Device Information menu, then choose
Long Tag to set the long tag using the on-screen keypad.
Device Information
1 Tag
2 Long Tagxxxxxxxxxxxxxxxxxxxxxxxxxxx
3 Device
4 Sensor
5 Wireless
When you're finished with your configuration, tap SAVE, and
8.
choose to save the changes to the Internal Flash memory of the
device and tap SAVE again.
Save as...
1 LocationnnnnnnnnnnnnnnInternal Flash
2 Name
3 Config Type
Installation
WHART01
Device
Revised October-2019