Emerson IEC 62591 Instruction Manual page 17

Revised October-2019
IEC 62591 Wireless Interface Instruction Manual (for ControlWave Micro)
Basic instructions for setting the long tag, Network ID and Join Key
using the 375 Field Communicator are included below; see the Field
Communicator user manual if you need more information.
Connect the Field Communicator clips to the communication
1.
connectors on the wireless device, and turn the communicator on.
From the Main Menu, double-tap HART Application.
375 Main Menu
HART Applicationnnnnnnnnnnnnnnnnnnn
FOUNDATION Fieldbus Application
Settings
Listen For PC
ScratchPad
When the HART application detects the device you want to
2.
configure, double-tap on it.
HART Applicationnnnnnnnnnnnnnnnnnnn
Online
0:WHART01nnnnnnnnnnnnnnnnnnnnnnn
3. From the Online Menu, double-tap Configure.
Online
1 Overview
2 Configure nnnnnnnnnnnnnnnnnnnnnnn
3 Service Tools
From the Configure Menu, double-tap Manual Setup.
4.
Configure
1 Guided Setup
2 Manual Setup
3 Alert Setup
nnnnnnnnnnnnnnnnnnnn
Installation 2-7