Prepare Door for Installation
Items needed:
Drill Sheet
#2 Phillips Screw Driver
Recommended
Door and door frame material : Wood
Please ensure that there is an existing handle on your door for push - pull access.
Not for: metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to your door pictures to info@igloohome.co
Drill
10mm (25/64")
Drill Bit
25mm (1")
Spade Bit
Recommended
Gap between door and door frame: <3mm (1/8")
54mm (2-1/8")
20mm
(25/32")
Chisel
Hole Saw
Hammer
7