Lock Tutorial - Igloohome Deadbolt 2S Installer/User Manual

Lock Tutorial

Edit PIN codes
Once PIN code is generated, user must key the generated code onto the Deadbolt 2S keypad
followed by # to activate the code before proceeding. To change the PIN, enter:
Press * > Key 1 0 and tap # > Current PIN and tap # > New 4 - 9 digit PIN and tap # > New
4 - 9 digit PIN and tap #
Current PIN Code
New PIN Code
On Keypad
Notes:
• Editing of codes can also be done in app
• PINs must be used once before it can be edited.
Enabling & Disabling Timer Re-Lock*
2
To Enable
To Disable
Note: By default, Timer Re-lock is disabled.
9V Jumpstart Feature
3
Step 1 - Touch and hold the battery contacts against the 9V jumpstart pin on the lock and
you will hear a series of beeps
Step 2 - While holding the 9V battery to the jumpstart, key in your PIN code on the keypad
followed by '#' to unlock
24
1234 5678
010101
Press * > Key 1 0 # > 1234 5678 # > 010101 # > 010101 #
* 2 1 # <Master PIN> # <Duration between 5-120 seconds> #
* 2 0 # <Master PIN> #