Lincoln Electric FLEXCUT 125 CE Safety Instruction For Use And Maintenance page 18

D - ASSEMBLY AND INSTALLATION
Fluids used
Compressed air
Compressed air
Compressed air
The customer should provide the means for supporting and keeping away from mechanical, chemical, or
thermal damage, the cables and flexible pipes from their source to the entry of the power source
D-14
Conditions for gas types
CUTTING GAS
Purity type
CARBON STEEL
ISO 8573-1:2010,
Class 1.4.1
ISO 8573-1:2010,
Class 1.4.1
* The quality of the compressed air has a significant effect on the
cutting results.
It must be filtered (5µm)
IT MUST BE DRY AND FREE OF OIL
Layout of cables and flexible pipes
Supply pressures of the
installation
(pressure reducing valve
exit)
7.2 bar +/-1
7.2 bar +/-1
FLEXCUT 125 CE INSTALLATION
8695 4496 / B
Fully flow rates used
260 l/mn
260 l/mn
.