Minimum Configuration Of Control Connections - Nord Drivesystems NORDAC PRO User Manual

NORDAC PRO (SK 500P) – Users Manual for Frequency Inverters

4.3 Minimum configuration of control connections

If the frequency inverter is to be controlled via the digital and analogue inputs, this can be
implemented immediately in the condition as delivered. Settings are not necessary for the moment.
Minimum circuitry
Basic parameters
If the current setting of the frequency inverter is not known, loading the default setting is
recommended  P523 = 1. The inverter is pre-programmed for standard applications in this
configuration. If necessary the following parameters can be changed with the optional ControlBox
SK TU5-CTR.
Operating value display
(or operational)
following mains ON
_ _ _ _ _
P 0 - -
Display
parameters
68
P 7 - -
Information
P 1 - -
P 2 - -
Basic parameters
Motor data
P 1 0 2
Acceleration time
0 ... 320s
P 1 0 3
Deceleration time
0 ... 320s
P 1 0 4
Min. frequency
0 ... 400Hz
P 1 0 5
Max. frequency
0.1 ... 400Hz
Potentiometer, 10 kOhm
(Function P400 [-01] = 1)
(min./max. Range = P104/105
P 5 - -
Additional
parameters
P 5 2 3
P 4 - -
=1
Load factory data
Control terminals
P 4 0 0
Function Analogue input
0...10V frequency
P 4 2 0
Function Digital input 1
ON right
BU 0600 en-2319
Switch, ON/OFF
(Function P420 [-01]= 1)