Table of Contents
Advertisement
3.2 SD Card Insertion
This tablet supports a single micro SD card for secondary storage. SD card slot is on back side of tablet, under
the battery cover as shown in figure 3.2, "SD Card Slot".
Once SD card is inserted successfully, you can check its details in ‐
Se ngs → Storage → SD card
3.3 Charging the Device
We recommend that you fully charge the battery prior to first use. A high power USB port is provided; we
recommend that this is used to charge the device.
When a charger is connected, the charging LED on the device gives a visual indicator of the state of charge:
Green LED
Red Solid LED
In rare cases, during use, the battery may discharge to a very weak state. In such a state, when a user attempts to turn
on the device using the power button, the device may not respond. To recover from this, connect the charger to the
device. The LED will then glow red, and stay that way for a few minutes. The device will then boot into charging mode.
Version 1.0
Green indicates that the battery is fully charged (100%)
Red Solid LED indicating Battery is charging
Hide quick links:
Advertisement
Table of Contents
