Table of Contents
Advertisement
Settings — Opens a submenu with the following options (see
•
previous page):
Hardware Settings — Displays the Hardware Settings dialog box with device
•
information and side tabs to change the device name, internal clock, and password
of the connected device.
It also contains an Edit Communication Settings button, which provides an
alternative method of accessing the Communication Settings dialog box.
Communication Settings — Opens the Communication Settings dialog box to
•
change IP settings of the connected device.
Reset Device — Opens the Reset Device dialog box, with selectable modes for
•
resetting the connected device, as well as the Unit Information (also displayed in the
Hardware Settings dialog box).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password for this device (see
and Permissions Panel
•
Update Firmware — Begins the process to upload and update the firmware to this
device.
DTP2 R 212 Help — Opens the DTP2 R 212 PCS Help File in a separate window.
•
About This Module — Opens the About This Module dialog box, with the PCS
•
module part number and version.
Software Menu
The Software menu (see figure 23), available on
the top right side of the screen, contains options
pertaining to PCS and its settings.
Show Expanded Device Tabs
Selecting Show Expanded Device Tabs (see
figure 23.
the device IP address or connection method in
the Device tab (see figure 24).
Software Settings
This option resets all disabled confirmation dialogs to the default settings.
1.
From the Software menu, select Software Settings (see figure 23,
on page 60 to change a password).
) from the Software menu displays
1
figure 22
Figure 23.
Figure 24.
Expanded Device Tab
DTP2 R 212 Series • Configuration Software
on the
Roles
PCS Software Menu
). The
2
28
Advertisement
Table of Contents
