Step 11: Configure Registration Accounts - NEC SV9100 Configuration Note

4.11

Step 11: Configure Registration Accounts

This step describes how to configure SIP registration accounts. This is required so that the
E-SBC can register with the BroadCloud SIP Trunk on behalf of IP-PBX. The BroadCloud
SIP Trunk requires registration and authentication to provide service.
In the interoperability test topology, the Served IP Group is IP-PBX IP Group and the
Serving IP Group is BroadCloud SIP Trunk IP Group.

To configure a registration account:
1. Open the Account Table page (Configuration tab > VoIP menu > SIP Definitions >
Account Table).
2. Enter an index number (e.g., "0"), and then click Add.
3. Configure the account according to the provided information from , for example:
Application Type
Served IP Group
Serving IP Group
Username
Password
Host Name
Register
Contact User
4. Click Apply.
AudioCodes Mediant E-SBC
Parameter
Figure 4-37: Configuring SIP Registration Account
SV9100 IP-PBX & BroadCloud SIP Trunk
SBC
IP-PBX
BroadCloud
As provided by BroadCloud
As provided by BroadCloud
interop.adpt-tech.com
Regular
8325624857 (pilot number)
60
Value
Document #: LTRT-12490