NEC SV9100 Configuration Note page 55

Connecting ip-pbx to broadcloud sip trunk using audiocodes mediant e-sbc
Hide thumbs Also See for SV9100:
Table of Contents

Advertisement

Configuration Note
3.
Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule applies to messages sent to the BroadCloud SIP Trunk IP Group. This
replaces the host part of the SIP P-Asserted-Identity Header with the value from the
SIP To Header.
Index
Manipulation Name
Manipulation Set ID
Message Type
Condition
Action Subject
Action Type
Action Value
Figure 4-32: Configuring SIP Message Manipulation Rule 1 (for BroadCloud SIP Trunk)
4.
Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to response messages sent to the BroadCloud SIP Trunk IP
Group for Rejected Calls initiated by the IP-PBX. This replaces the method type '502'
with the value '480', because BroadCloud SIP Trunk not recognizes '502' method
type.
Index
Name
Manipulation Set ID
Message Type
Condition
Version 7.0
Parameter
Parameter
55
4. Configuring AudioCodes E-SBC
Value
1
Change P-Asserted host
4
any.request
header.p-asserted-identity exists
header.p-asserted-identity
Modify
header.to.url.host
Value
2
Reject Responses
4
any.response
header.request-uri.methodtype=='502'
AudioCodes Mediant E-SBC

Advertisement

Table of Contents
loading

Table of Contents