Configuration Note
4.
Verify the SIP Carrier Choice in programming command Easy Edit> Advanced
Items> VoIP> Networking> SIP Networking> Profile 1> SIP Profile 1 – Networking
Mode> SIP Profile 1 – Server Setup. The SIP Carrier Choice value should be set to
Default. Register mode should be set to None. UDP or TCP transport protocol can be
used. Enable 302 Return as the Call Forward Temporarily Moved method if required:
Figure 3-4: Easy Edit> Advanced Items> VoIP> Networking> SIP Networking> Profile 1> SIP
Profile 1 – Networking Mode> SIP Profile 1 – Server Setup
Version 7.0
3. Configuring NEC SV9100 IP-PBX
15
AudioCodes Mediant E-SBC