NEC SV9100 Configuration Note page 26

a. Select the 'Index' radio button of the OAMP + Media + Control table row, and
then click Edit.
b. Configure the interface as follows:
IP Address
Prefix Length
Default Gateway
VLAN ID
Interface Name
Primary DNS Server IP Address
Underlying Device
3. Add a network interface for the WAN side:
a. Enter 1, and then click Add Index.
b. Configure the interface as follows:
Application Type
IP Address
Prefix Length
Default Gateway
VLAN ID
Interface Name
Primary DNS Server IP Address
Secondary DNS Server IP Address
Underlying Device
4. Click Apply, and then Done.
The configured IP network interfaces are shown below:
Figure 4-3: Configured Network Interfaces in IP Interfaces Table
AudioCodes Mediant E-SBC
Parameter
Parameter
26
SV9100 IP-PBX & BroadCloud SIP Trunk
Value
192.168.100.15 (IP address of E-SBC)
24 (subnet mask in bits for 255.255.255.0)
192.168.100.254
1
Voice (arbitrary descriptive name)
192.168.100.254
vlan 1
Value
Media + Control
82.153.203.53 (WAN IP address)
25 (for 255.255.255.128)
82.153.203.49 (router's IP address)
2
WANSP
82.153.203.49
8.8.8.8
vlan 2
Document #: LTRT-12490