NEC SV9100 Configuration Note page 56

Action Subject
Action Type
Action Value
Figure 4-33: Configuring SIP Message Manipulation Rule 2 (for BroadCloud SIP Trunk)
5. Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to forward messages sent to the BroadCloud SIP Trunk IP Group
with 00 prefix and the IP-PBX IP address in the CONTACT initiated by the IP-PBX.
This remove the 00.
Index
Name
Manipulation Set ID
Message Type
Condition
Action Subject
Action Type
Action Value
AudioCodes Mediant E-SBC
Parameter
56
SV9100 IP-PBX & BroadCloud SIP Trunk
header.request-uri.methodtype
Modify
'480'
Value
3
Call FW change Contact
4
invite.response.302
header.Contact regex
(.*)(sip:00)(.*)(@)(192.168.100.10)(.*)
header.Contact
Modify
$1+'sip:'+$3+$4+'interop.adpt-tech.com'+$6
Document #: LTRT-12490