Martin Cyclo Directional IP65 User Manual page 37

3. See Figure
13. Remove
the reflector
by lifting it out
of the tube
module
housing.
4. In 04 models,
remove the
white tube by
holding the
metal caps at
both ends of
the tube,
rotating the
tube approx.
1/4 turn in
either direction, and sliding the tube's terminal pins out of their
sockets. Support the tube at both ends as it is released.
5. See Figure 14. To release the diffuser, push the locking bars from
position B in towards the center of the luminaire until they are in
position A. Lift the diffuser out of the luminaire.
Figure 14: Removing the diffuser
6. The red, green and blue tubes are installed close together. To
remove, press with one finger on the metal caps at both ends of each
tube and rotate to release from the sockets.
Figure 13: Removing the reflector
A A
B B