Martin Cyclo Directional IP65 User Manual page 26

C o n f i g u r i n g f o r s t a n d - a l o n e o p e r a t i o n
Stand-alone operation is enabled by setting pin 10 on the DIP switch to ON
and pin 8 to OFF. The other pins are then used to program the luminaire.
See "Stand-alone operation settings" on page 30 for details of how to set
these pins.
After making connections
After you have finished making power and data connections, make sure that
any holes not used for cable entry are sealed either with blanking plugs or
unpierced membrane cable glands, then close the connections
compartment as described in "Access to connections compartment" on
page 10 before applying power.
26 Cyclo IP65 Directional user manual