Martin Cyclo Directional IP65 User Manual page 14

Adjust ing the tube module t ilt angle
To rotate the tube module in the support arms:
1. Ensure that the luminaire is securely mounted and isolated from power.
1. Open the front cover as described in "Access to tube module" on page 9.
2. See Figure 7. Loosen both the tilt adjustment screws with a long Allen
key, rotate the tube module to the desired angle, and retighten.
3. Reinstall the front cover as described in "Access to tube module" on page
9.
14
3mm
Figure 7: Tube module tilt adjustment screws
Cyclo IP65 Directional user manual
3mm