Service; Cleaning; Tube Replacement - Martin Cyclo Directional IP65 User Manual

Service

DANGER! Read "Safety information" on page 3 before attempting to
service this product!
With long-life fluorescent tubes and no moving parts, the Cyclo IP65
Directional is almost service-free, but this section describes the minimum of
periodic maintenance required.
Refer any service operation not described in this manual to an authorized
Martin service agent.
C l e a n i n g
Use a damp cloth or soft brush soaked in a solution of water and a mild
detergent cleaner such as auto shampoo to clean luminaires. Do not use
abrasive, acidic or caustic cleaning products, or you will damage the
luminaires' anodized finish.
Do not use a high pressure water-jet for cleaning: IP65 luminaires are
protected against water projections and low-pressure water jets only.
T u b e r e p l a c e m e n t
To replace the tubes in the Cyclo IP65 Directional:
1. Isolate the luminaire from power and ensure that power cannot be
reapplied, even accidentally.
2. Loosen the front cover release screws, lift up the release flap and open
the front cover as described in "Orientation and adjustment" on page 12.
36 Cyclo IP65 Directional user manual