Orientation And Adjustment - Martin Cyclo Directional IP65 User Manual

the T-section (C) on the upper side of the base passes behind the
retaining rail (D).
6. Tighten the retaining screws (E) so that the retaining rail (D) grips the T-
section (C) tightly. Check that the luminaire is held securely.
O r i e n t a t i o n a n d a d j u s t m e n t
Important! The Cyclo IP65 Directional support arms must both
be fixed at the same angle. Do not twist the luminaire in the
support arms, or you may deform the product and make it
impossible to obtain a waterproof seal.
The Cyclo IP65 Directional can be installed in any orientation.
See Figure 5. The angle of the support arms can be adjusted in the base
module, and the tube module can be rotated in the support arms, allowing a
wide range of tilt angles.
12
45°
90°
30°
15° 15°
0°
0°
60°
= 60° = 60°
Figure 5: Tilt angle adjustment
Cyclo IP65 Directional user manual
45°
120°
30°
45°
60°
= 105° = 105°