Table of Contents
Advertisement
11.3.3 Telemetry channels with special functionality
Bosch Motorsport
4.
Choose between 'Fast/Slow block' transmission. See chapter 'Adding a recording
group' for information about 'Fast/Slow block'.
None – channel(s) are not transferred
Slow – channel(s) are transferred in the slow telemetry block
Fast – channel(s) are transferred in the fast telemetry block
The FM40 allows the transmission of special information such as running distance of cur-
rent lap, lap number of current lap and lap time, fuel consumption of last lap completed.
You have to assign the channel type to the telemetry channel so that it is recognized ac-
curately by RaceCon.
Channel's names are e.g.: distlap, fuelcons, lapctr, laptime. Different channel names are
possible between different devices (e.g. ECU MS 3 Sport, ECU MS 5.1).
1.
Double-click on FM40 in the project tree. An overview of all available telemetry chan-
nels is displayed.
2.
Click on the 'Settings' tab at the bottom, to edit the channels.
3.
Assign the desired channels to the channel types. The table below shows the function
of the available channel types.
4.
Click 'Ok' when done.
Data_Logger_C_60_Manual
Recording and Telemetry | 11
71 / 100
Advertisement
Table of Contents
