Table of Contents
Advertisement
Bosch Motorsport
5.
Click 'Next' when done. The second part of the 'Sensitivity/Offset Wizard' opens.
Physical
(channel)
value
6.
Click 'Next' when done. The third part of the 'Characteristic Curve Wizard' opens.
Physical
limits of
channel
NOTICE
Working with automatically created measurement sheets is ex-
plained in chapter 'Setting up an online measurement'.
7.
Click 'Finish' when done.
8.
Enter channel name and description.
9.
Click 'OK' when done.
The channel is inserted into the C 60 Project Tree.
Channel is
linked to
ANA05
Available measurements for channel:
Measurement label
raw_name
Data_Logger_C_60_Manual
Analog and Frequency Inputs | 9
Select physical unit.
Choose 'Ohm' to enter
datasheet values directly.
Enter
resistance/temperature
pairs from sensor datasheet
here (The 3.01 kOhm pullup-
resistor is automatically
taken into account)
Enter physical limits
of the channel
Choose data type of the
measurement variable
This sensor does not
need offset calibration
Enter name to
automatically create a new
measurement sheet
Input pin
Characteristic
Pull-up
curve for
resistor is
sensor
activated
Function
mV value of sensor
Adjustment
is disabled
45 / 100
Advertisement
Table of Contents
