Table of Contents
Advertisement
Bosch Motorsport
2.
In the 'File' menu select 'New' to create a new project.
3.
In the Toolbox select the C 60 and drag it into the Main Area. A pop up window to
specify the C 60 program archive appears. An information shows that the archive is
valid or not.
4.
Select the program archive delivered with the C 60 (.PST file).
5.
Click 'Next'.
6.
Select 'Race track'.
7.
Choose the way to switch display pages that fits to your hardware configuration.
8.
Click 'Finish'. The C 60 is inserted into the project and RaceCon tries to connect to the
device.
9.
RaceCon detects configuration differences between the C 60 and the RaceCon project
and asks for permission for data download.
10. Click 'OK' to proceed.
The download starts and the C 60 carries out a reset. After the reset, RaceCon reconnects
to the C 60. Local configuration on both the PC and C 60 match (Indicated by green back-
ground and dot). The C 60 is now connected to RaceCon.
7.2 Feature Activation
– Optional software feature packages are available for the C 60 If you have purchased
an optional software feature package, it must be activated before it becomes opera-
tional.
– The feature activation status is stored permanently in the device and requires activat-
ing once only.
– As the activation key is device specific, a key delivered with one C 60 does not work
on any other C 60 .
– If you have not purchased an option package, the next steps can be skipped.
Data_Logger_C_60_Manual
Starting up the C 60 | 7
23 / 100
Advertisement
Table of Contents
