11.1 Features
11.2 Configuration of Recordings
Bosch Motorsport
11 Recording and Telemetry
Telemetry
– Support for long-range online telemetry
– Individual programmable team code
– Fast block – slow block mechanism
– Programmable data rate
Burst telemetry
– Support for burst telemetry (BT 60)
– Programmable IP configuration
– BT 60 diagnosis via C 60
1.
Expand the list of 'Loggers' by clicking on '+' in the C 60 Project Tree.
2.
Double-click on 'Recording' in C 60 Project Tree. The recording configuration is dis-
played in the Main Area.
3.
To add measurement channels to a recording, click 'C 60' in the C 60 Project Tree. In
the Data Area, the measurement channels are displayed.
4.
Drag and drop desired measurement channels into recording group.
5.
To edit channel's settings, mark the channel(s) and click 'Edit Channel'. An 'Edit Re-
cording Channels' window opens.
NOTICE
If no condition is defined or condition is 'false', measurement chan-
nels are recorded at the value chosen in 'Rate'.
If the condition is 'true', measurement channels are recorded at the value chosen in 'True
rate'.
6.
Click 'OK' when done.
Data_Logger_C_60_Manual
Recording and Telemetry | 11
67 / 100