Before Beginning - Havis DS-GTC-1100 Series Owner's Manual

Docking station for getac ux10 fully rugged tablet
Table of Contents

Advertisement

Before Beginning

Havis is pleased to provide this Owner's Manual to aid in the proper installation and use of the
DS-GTC-1100 Series Docking Station for the Getac UX10 Fully Rugged Tablet.
For questions regarding the set-up of your DS-GTC-1100 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.
This Owner's Manual applies to the following Part Numbers:
DS-GTC-1101
DS-GTC-1102
DS-GTC-1101-3
DS-GTC-1102-3
• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
• DO NOT USE COMPUTER WHILE DRIVING.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.
ARE PRESENT
• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR UNDOCKING WITH YOUR
COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES CAN CAUSE PERMANENT DAMAGE.
• FOR THE DS-GTC-1101, DS-GTC-1101-3, DS-GTC-1102, DS-GTC-1102-3, DS-GTC-110X, & DS-GTC-110X-X DOCKING
STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires a certified,
automotive grade, Getac approved 120W power source rated for a continuous, regulated 19VDC output (Havis
Part Number LPS-140 or equivalent). Failure to comply with this requirement will cause product damage that is
NOT repairable and is NOT covered under warranty.
• FOR THE DS-GTC-1103 & DS-GTC-1103-3 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE
SOURCE: The Getac UX10 Fully Rugged Tablet requires a certified, Getac approved power source rated for a
continuous, regulated 19VDC output. Failure to comply with this requirement will cause product damage that is
NOT repairable and is NOT covered under warranty.
• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN 0°C to 50°C (32°F to 122°F).
PLEASE REFER TO GETAC UX10 OWNER'S MANUAL FOR MORE INFORMATION.
Precautions
• Do not place metal objects or containers of liquid on top of the Docking Station
• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop
• Use only the specified Power Supply (Part # LPS-140) with this Docking Station
• Do not connect cables into ports other than what they are specified for
• Do not leave the Docking Station in a high temperature environment (greater than 71°C, 160°F) for a long period of
time
DS-GTC-1103
DS-GTC-1106
DS-GTC-1103-3
DS-GTC-1106-3

Advertisement

Table of Contents
loading

Table of Contents