Advertisement
0 SHADNG Correction Potentiometers
These pots. are utilized to adjust the shading correction values.
1 1 9
C A M E R A
This terminal connects the CCU to the camera head.
4) VIDEO OUT 1
This terminal outputs a composite video signal.
o VIDEO OUT 2
This terminal outputs a composite video signal identical to VIDEO OUT 1
unless the CCU i s configured for Operational Video Output, i n which case,
this terminal outputs operational video signals instead of composite
signals.
This terminal normally outputs HD(Horizontal Drive) signal. When the
H2505 EXTERNAL SYNC option is installed this terminal becomes an HD
signal input.
V D
4 , '
This terminal normally outputs VD(Vertical Drive) signal. When the
H2505 EXTERNAL SYNC option is installed this terminal becomes a VD signal
input.
G N D
43+
This is the frame ground of the CCU. U t i l i z e this terminal t o provide a
c o m m o n " ground to other equipment being used.
40 LINE
This cable supplies power to the CCU.
A G C ON-OFF Switch
This switch enables or disables the Automatic Gain Control. T h e ON
Position of the switch implements the AGC circuitry.
Advertisement
