Display Features; Specifications; Product Dimensions - Dometic CapTouch Installation And Operating Manual

Specifications

Additional Parts
1
Required for CW Installations (not included)
Water Inlet Temperature Sensor
Optional Parts
Outside Air Temperature (OAT) Sensor
Inside Air Temperature Sensor
Auxiliary Electric Heater
Room Temperature/Relative Humidity
Combination Sensor
Seawater Low-Limit Temperature Sensor
Pump Sentry Water Sensor
1 Additional parts are not included with the standard control package.
I The maximum length for the display and sensor
cables is 75 ft (22.9 m).

3 .2 Display Features

This section explains the function of the icons on the
CapTouch and CapTouch Wi-Fi displays.
1 CapTouch Wi-Fi Control Display
Icon Name
Fan
Dometic
Up
Down
4
DX CW
X
X X
X X
X X
X X
X
X
Function
Cycles through the different fan
speeds
Brand identification. No
operational function
Raises the temperature set point
Lowers the temperature set point
Icon Name
Temperature
Indicator
Mode
Indicator
HVAC Mode
Wi-Fi
Indicator
4 Specifications
The following table lists the CapTouch control
dimensions, cable lengths, system inputs, and
operational specifications.

4 .1 Product Dimensions

Display Panel Dimensions
for the Idea Bezel
Display Panel Dimensions
for the Eikon Bezel
Cut-Out Dimensions for
the Idea Bezel
Cut-Out Dimensions for
the Eikon Bezel
CapTouch Cabin Control
Function
Displays the inside, set point,
outside, and water temperatures,
as selected
Indicates the current display mode
• Cycles through the different
modes
• Sends the display to sleep if
held for three seconds
• Applicable to CapTouch Wi-Fi
model only
• Indicates Wi-Fi is active if lit.
4.4 in. x 3.0 in.
(112 mm x 76 mm)
4.5 in. x 2.9 in.
(114 mm x 74 mm)
2.3 in. x 3.5 in.
(58 mm x 89 mm)
1.9 in. x 2.8 in.
(48 mm x 71 mm)
EN