Dometic CapTouch Installation And Operating Manual page 24

Operation
– Done (iOS)/Cancel (Android)
When selecting +Add a new group the CapTouch
App displays the Add a New Group screen. When
selecting Cancel or Done, the screen remains in the
Add Thermostat to account screen.
5. Tap Done.
Once the thermostat is added to the account, the
CapTouch App returns to the list of thermostats and
automatically places the new thermostat on the main
screen.
I If a disconnected thermostat is selected from the
thermostat list, an "Information is not current.
Device has been off-line" pop-up message
appears. Tap OK.
Access the menu options from the main screen to
connect a thermostat to a wireless router.
7 .5 .7 Connecting the Thermostat to a
Wireless Router
I Make sure that a wireless router is set up and
available for connection.
21 Connecting the Thermostat to a Wireless Router
The CapTouch App displays these instructions in-app.
Follow these instructions for each thermostat added to
the account.
1. Register the thermostat to make sure that the ID is
valid and available. A security verification appears
confirming the registration.
24
I Registration must be done while the smart device
is connected to the Internet and before the
thermostat is in AP mode.
2. Open the CapTouch App.
3. Tap .
4. Select Connect Thermostat to router.
22 Following Step 1 of the In-App Instructions
5. Complete Step 1: Set to AP Mode.
a. Tap Mode on the thermostat to activate the display.
b. Tap Mode until the display enters OFF mode.
c. Tap Mode and Up (+) simultaneously until P01
appears.
d. Use the Up (+) and Down (-) icons simultaneously
until P30 appears.
e. Tap the Mode icon to enter the parameter
adjustment menu.
f. Tap Up (+) until EnA appears.
g. Tap Mode. AP appears on the display.
I Once Wi-Fi parameter 30 is enabled, the Wi-Fi icon
on the thermostat flashes white three times per
second until a connection is established.
CapTouch Cabin Control
EN