Troubleshooting - Breville LOV600 Instruction Book

Troubleshooting

POSSIBLE PROBLEM
Oven will not switch "ON"
The pizza does not
cook evenly
Steam is coming out
from the oven door
Water is dripping onto
counter from under door
The LED screen
displays 'E01'
The LED screen
displays 'E02'
Temperature are changing
when convection
button is pressed
22
LOV600BLK_ANZ_IB_B20.indd 22
EASY SOLUTION
•
Check that the power plug is securely inserted into the outlet.
•
Insert the power plug into an independent outlet.
•
Insert the power plug into a different outlet.
•
Reset the circuit breaker if necessary.
•
Some large pizzas may brown unevenly in compact ovens. Open the oven
door half way through the cooking time and turn the pizza 180 degrees for
more even darkness.
•
This is normal. The door is vented to release steam created from high
moisture content foods such as frozen breads. Be mindful that the steam
can be hot.
•
This is normal. The condensation created from high moisture content foods
such as frozen breads will run down the inside of the door and can drip onto
the bench.
•
The LED screen will display 'E01' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
•
The LED screen will display 'E02' when there is a non-resettable issue with
the appliance. Should this occur, immediately remove the power cord from
the power outlet and call Breville Consumer Support.
•
This is normal. The temperature is calibrated to compensate for the
convection fan increasing cooking rates.
21/2/20 2:41 pm