Wiring Diagram - Whirlpool WVU17UC0JS Installation Instructions And Use & Care Manual

Replacing the LED Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect power.
2. Remove the grease filters from the hood.
3. Remove the fused light bulb from behind the lamp spacer.
SEL0157858A

WIRING DIAGRAM

Light Switch
BK
WH
LED BULB
E26
Motor characterstics
Power Supply
120VAC
Frequency 60Hz
Current 1.2±10%A
Power absorption
73±10% W
Motor resistance (ohms)
17.1±10% Ohms
White - Red
White - Black 13.6±10% Ohms
For supply connection
use wires suitable for
at least 75° (167°F)
4. Screw a 120V, 9W maximum, LED light bulb with
E26 base into the socket.
5. Replace the grease filters.
6. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
Off - On
BK
C25
N
Motor Switch
Low - Off - High
Ground
Screw
L G
Remote Switch
BK BK
For ADA compliance add these elements
during the installation
L
11