U-Line H-2108 Quick Start Manual

H-2108, H-2109, H-2110
π
H-2111, H-2641, H-2642
DUMPING HOPPER
WARNING! Follow these safety instructions to
avoid any personal injuries.
1. Failure to read and understand this owner's manual
before using or servicing the hopper constitutes a
misuse of the product. All persons who will install,
use or care for this product must be familiar with this
material.
2. The load must be removed and the hopper secured
against unexpected movement before any work is
performed.
3. Ensure that all safety and warning labels stay in
place and are legible.
4. Do not use the dumper if any damage or unusual
noise is observed.
5. Watch the hopper carefully when it is being
dumped or moved.
4
5
2
1
3
PAGE 1 OF 3
1-800-295-5510
uline.com
SAFETY INSTRUCTIONS
6. Ensure that the dumper is locked in place and
secured to the fork truck's fork mast before
transporting it or raising it off the ground.
7. Maintenance and repairs are to be done only by
personnel qualified to perform the required work.
8. Use only factory-approved replacement parts.
9. Assembly must be performed by suitably trained
personnel with access to the appropriate equipment
and tools.
10. Adding casters will reduce the rolling load capacity
of some models. Capacities are:
• Steel casters–1,200 lbs/caster
• Mold-on-rubber casters–600 lbs/caster
• Poly-on-steel casters–1,200 lbs/caster
WARNING LABELS
1. "WARNING! KEEP CLEAR OF PINCH POINT"
2. "CAUTION! DO NOT PLAY ON OR AROUND"
3. "WARNING! KEEP CLEAR WHEN IN USE"
4. "WARNING! DO NOT WRAP RELEASE CABLE ON HAND.
PINCH POINT STAY CLEAR WHEN DUMPING"
5. "WARNING! SECURELY ATTACH SAFETY CHAIN TO
FORKLIFT"
0515 IH-2108