Advertisement
Mount module-bearing profile
Feed square-head screws M10x25 into
the lower bearing profile and through
the slotted holes of the fasteners.
Secure with flange nuts M10.
Extend module-bearing profile
Position next profi le.
Mount splice E from below.
Tighten SW6 screws
(pre-assembled)
Please ensure that sufficient space is
left at profile joints for the splice.
© Schletter GmbH
Gewerbegebiet an der B15
•
Fax: +49 8072 9191-9200
E-mail: solar@schletter.eu
•
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: info@schletter.co.uk
LaQ07 Laminate Mounting Instructions
Alustraße 1
83527 Kirchdorf/Haag i. OB
•
•
www.schletter.eu
Updated 04/2012
•
•
Germany
Tel.: +49 8072 9191-200
•
•
Subject to change without notice
•
GB
3
Advertisement
