Page 2
Safety information The system is to be installed only with ballasting in accordance with static loads. You will receive these with the planning of your solar plant from the Schletter configurator Risk of breakage! PV modules can be damaged if they are stepped on.
Page 3
Downloads FixGrid18-100 | V2 | MONTAGEANLEITUNG | 201811 FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 S C H L E T T E R S O L A R G M B H...
The mounting times can be optimized by pre-assembling a series of base rails next to each other on mounting frames with the module supports. FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 4 | 10 S C H L E T T E R S O L A R G M B H S U B J E C T T O M O D I F I C A T I O N S ...
Page 5
FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 S C H L E T T E R S O L A R G M B H S U B J E C T T O M O D I F I C A T I O N...
Page 6
Tool: Screwdriver with plug-in attachment 8 mm FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 S C H L E T T E R S O L A R G M B H S U B J E C T T O M O D I F I C A T I O N...
Page 7
• Repeat steps up to the last module in the row. FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 S C H L E T T E R S O L A R G M B H S U B J E C T T O M O D I F I C A T I O N...
Page 8
Ballasting from the combination of the 3 possibilities The information about ballasting can be obtained with the planning of your solar plant from the Schletter configurator. Use fixing flaps to attach the parts of the surface protection mat to the additional trough.
Page 9
Further Information about our systems can be found on our website: www.schletter-group.com in the solar section under Downloads. FixGrid18-100 | V2 | MOUNTING INSTRUCTIONS | 201811 S C H L E T T E R S O L A R G M B H S U B J E C T T O M O D I F I C A T I O N S ...
Page 10
SCHLETTER SOLAR GMBH Alustrasse 1 83527 Kirchdorf GERMANY www.schletter-group.com We reserve the right to changes, including technical modification.
Need help?
Do you have a question about the FixGrid18-100 and is the answer not in the manual?
Questions and answers