Advertisement
Define the area of installation
Concentrate the number of fasteners
in edge and corner zones.
Further recommendations are
offered in the structural analysis.
h
Building
Calculation formula:
.
e = min (x / y or 2
h)
Mount fasteners
Select corresponding distance be-
tween fasteners a for the respective
module. The exact dimensions are
displayed for you in the Autokalkula-
tor schematic diagram.
Please observe shading distances
b between rows - also visible in the
schematic diagram.
The distance between fasteners
c must comply with the structural
analysis for fasteners - and is also
displayed in the schematic diagram.
Further recommendations are offered
in the structural analysis (for fasteners).
The number of fasteners required is
also dependent upon the properties
of the roof - please verify details with
the manufacturer!
2
FixZ-7 Mounting Instructions
e/10
e/4
e/4
e/10
© Schletter GmbH
Gewerbegebiet an der B15
•
Fax: +49 8072 9191-9200
E-mail: solar@schletter.eu
•
Your contact in the UK: Schletter UK Limited, Tel.: +44 1296 461 800, Fax: +44 1296 461 801, E-mail: info@schletter.co.uk
Corner zone
Edge zone
Corner zone
e/10
e/4
c
a
b
c bottom
Alustraße 1
83527 Kirchdorf/Haag i. OB
•
•
www.schletter.eu
•
x
Edge zone
Corner zone
Field zone
Edge zone
Corner zone
b
a
c top
Germany
Tel.: +49 8072 9191-200
•
•
Updated 08/2012
Subject to change without notice
•
•
EN
Edge zone
y
e/10
e/4
Advertisement
