Vertical Transport Roller/Sensor/Clutch Replacement - Ricoh STINGER-C1 Service Manual

PAPER FEED 17 May, 1999
6.6.4 VERTICAL TRANSPORT ROLLER/SENSOR/CLUTCH
REPLACEMENT
[A]
[B]
[C]
[E]
A250R708.WMF
[D]
A250R709.WMF
1. Remove the rear right cover.
2. Replace the vertical transport clutch [A] (1 snap ring).
3. Open the vertical transport cover and remove the pin [B].
4. Remove the vertical transport guide [C] (2 screws).
5. Remove the vertical transport roller [D] (3 E-rings, 2 bushings)
6. Remove the vertical transport sensor with bracket (1 screw).
7. Replace the vertical transport sensor [E].
6-26