SEON TR4-10 Quick Reference Manual

To program the DVR, connect a video monitor to the jack on the front of the DVR. Press the
button and the button within 10 seconds to display the Main Menu. Use the
STOP MENU
buttons to select menu items. Press the button to display a selected sub-menu. Use the
ENTER
and ð buttons or the wheel to change the value of a selected menu item. Press the
JOG
button to go back to a previous menu. From the Main Menu, press the
programming and resume normal DVR operation.
Note: Default values are shown below as [value].
Main Menu
Set Time/Date/Titles
Set Time: hour:minute:second am/pm
Set Date: month/day/year
Auto Daylight Savings: [on]/off
Display Input Voltage: [on]/off
Main Title: maximum 28 characters ( blank space, 0-9 A-Z
Camera Titles (1-4): maximum 12 characters (blank space, 0-9, A-Z, ().,+-/)
Record Mode/Schedule
Record Speed: 0.1 to 60 images/second [15]
Picture Quality: 1 to 6 (6 = highest quality) [4]
Repeat Record: [on]/off (on = overwrite the oldest image)
Record Audio: [on]/off
Delay-On Time: 0 to 60 minutes [30 seconds]
Delay-Off Time: 0 to 60 minutes [30 seconds]
Timers
Enable Timers: on/[off]
Day: Sun to Sat, Weekend, Weekday, Daily
Start Time: hour:minute:second am/pm
Stop Time: hour:minute:second am/pm
Recording Speed: 0.1 to 60 images/second [15]
Timer: on/[off]
Alarm Recording
Alarm Operation: [on]/off
Recording Speed (during alarm): 0.1 to 60 images/second [30]
Recording Quality (during alarm): 1 to 6 (6 = highest quality) [4]
Alarm Duration Time: 5 seconds to 60 minutes or non-stop [30 sec]
Programming the DVR
Estimated Recording Times in Hours with 80 GB Hard-Drive
Recording
Speed (ips)
60
30
20
15
10 144
5 288
1 1440
0.5 2880
0.3 4800
0.2 7200
0.1
14400
Estimated Recording Times in Hours with 40 GB Hard-Drive
Recording
Speed (ips)
ñ and ò
60
ï
30
MENU
20
button to stop
MENU
15
10
5
144
1 720
0.5 1440
0.3 2400
0.2 3600
0.1 7200
Recording speed - The recording speed is the total number of images per second (ips)
recorded from all active video channels. At a recording speed of 60 ips for four active
video channels, each channel is recorded at a speed of 15 ips (60 4).
, , ().,+-/)
System/Defaults
Alarm Buzzer
Buzzer Enable: on/[off]
Alarm-In: on/[off]
Disk Full: on/[off]
Video Loss: on/[off]
Format Disk
No
Yes (erases all information on the hard-drive)
System Update
No
Yes (updates DVR system software from CF card)
Load Defaults
No
Yes (sets all DVR options to default values)
Format CF Card
No
Yes (erases all information on the CF card)
Password
Password Enable: on/[off]
Password: 6 characters
Recording Quality
1 2 3 4 5
24 18 14 12 10
48 36 28 24 20
72 54 42 36 30
96 72 56 48 40
108 84 72 60
216 168 144 120 108
1080 840 720 600 540
2160 1680 1440 1200 1080
3600 2800 2400 2000 1800
5400 4200 3600 3000 2700
10800 8400 7200 6000 5400
Recording Quality
1 2 3 4 5
12 9 7 6 5 4.5
24 18 14 12 10
36 27 21 18 15 13.5
48 36 28 24 20
72 54 42 36 30
108 84 72 60
540 420 360 300 270
1080 840 720 600 540
1800 1400 1200 1000 900
2700 2100 1800 1500 1350
5400 4200 3600 3000 2700
÷
(blank space, 0-9, A-Z, ().,+-/) [888888]
TR4-10 Basic Mobile DVR System
6
9 Quick Reference Guide
18
27
36
54
Frequently Asked Questions
Why isn't the DVR power light on?
Switch the ignition on. If the
the troubleshooting section of the
6
Why doesn't the DVR start recording when I switch the ignition on?
The DVR may be programmed to start recording after a delay time (Delay-On), at
9
a specific time of day, or the disk-drive may be full.
18
Why does the DVR keep recording after I switch the ignition off?
27
The DVR may be programmed to keep recording for a period of time
54
after the ignition is switched off.
What does the external alarm switch do?
Closing the external alarm switch marks the current date and time as an important
event that can be easily located during video playback. It may also increase the
recorded video quality and recording speed for the duration of the alarm.
Why doesn't the alarm light turn off?
The light may be programmed to stay on for a fixed length of time, until
ALARM
any button is pressed, or until the ignition is switched off.
Why is the buzzer sounding and how do I stop it?
The buzzer may be programmed to sound if the external alarm switch is closed, if
the hard-drive is full, or if the video signal is lost. Press any button on the DVR to
silence the buzzer.
Why won't the button respond when I press it?
MENU
If the DVR is recording, press the
within 10 seconds.
Why won't the button respond when I press it?
STOP
The button may be locked by a password . To enter the password: connect a
STOP
video monitor to the video output jack; press the
and the wheel to enter the password; select Done and press the
JOG
stop recording for 10 seconds. To program the DVR, press the
enter the password.
How do I speed up or slow down the video playback speed?
Use the wheel to change the video playback speed and direction. Read
SHUTTLE
the wheel description for details.
SHUTTLE
Information in this guide is subject to change without prior notice.
© 2004 Seon Design Inc.
All rights reserved.
DVR power light is not on within 30 seconds, read
TR4-10 Installation and User's Guide .
(Delay-Off)
button and then press the button
STOP MENU
button; use the arrow buttons
STOP
button to
ENTER
button and re-
MENU
www.seon.com
Document Part Number: 700-0030-01