Engine Oil; Engine Cylinder - Honda EB2200i Owner's Manual

STORAGE
7. Turn the engine switch to the OFF position securely.
8. Tighten the carburetor drain screw, and then reinstall the maintenance cover.
9. Reinstall the spark plug cap and spark plug maintenance cover.

Engine Oil

Change the engine oil (see page 52).

Engine Cylinder

1. Remove the spark plug (see page 54), and pour approximately one teaspoon
(5 cc) of clean engine oil into the cylinder. Crank the engine several
revolutions to distribute the oil, and then reinstall the spark plug.
2. Reinstall the spark plug cap on the spark plug securely.
3. Reinstall the spark plug maintenance cover.
4. Reinstall the maintenance cover and tighten the maintenance cover screw
securely.
5. Pull the starter grip (see page 38) slowly until you feel resistance, and then
return the starter grip gently. This closes the valves so moisture cannot enter.
62
ENGINE SWITCH
FUEL OFF
OFF