Honda EB2200i Owner's Manual page 45

4. Press the GFCI RESET button:
• The green GFCI indicator will light continuously.
• If the red GFCI indicator starts to blink continuously, contact an authorized
Honda Power Equipment dealer.
When the GFCI RESET button pops out or the green GFCI indicator does not lit
during operation:
• Unplug all appliances from the GFCI protected receptacle.
• Press the GFCI RESET button.
– If the GFCI cannot be reset, the GFCI is faulty. Contact an authorized Honda
Power Equipment dealer.
– If the GFCI RESET button extends, this usually indicates a faulty power tool,
appliance, or cord. If that occurs, perform test steps 1 through 4 to verify
that the GFCI is in proper working order. If the GFCI tests correctly, then the
fault is likely to be in the power tool, appliance, or cord.
Repair or replace the faulty power tool, appliance, or cord before further
use.
OPERATION
GFCI RESET BUTTON
GFCI INDICATOR
43