SERVICING YOUR GENERATOR
SPARK ARRESTER SERVICE
The spark arrester must be serviced every 100 hours to keep it functioning as
designed.
If the engine has been running, the muffler will be very hot. Allow the muffler to
cool before servicing the spark arrester.
Clean the spark arrester as follows:
1. Remove the four 6 mm screws, and remove the muffler protector.
6 mm SCREWS
2. Remove the three 6 mm bolts, and remove the muffler, the spark arrester, and
the muffler gasket.
MUFFLER
6 mm BOLTS
56
MUFFLER PROTECTOR
MUFFLER GASKET
(Replace)
SPARK ARRESTER