Level 2 Control Screen - Graco PD44 Setup And Operation

Level 2 Control Screen

NOTE: A "1" indicates that the button is in the "ON" posi-
tion. A "0" indicates that the button is in the "OFF" posi-
tion.
NOTE: The Error Code button is shown on every screen
on the Motor Driven PD44. See the Main screen for defi-
nition, page 16.
NOTE: In the Level 1 Control Screen, if 'A Tank Status'
and 'B Tank Status' both display 'Levels Not Active' then
the level control feature is not installed on this machine.
Press the Main button to exit from this screen.
Low Level Shutdown button
When this button displays '1' and the material level of
either the 'A' component tank or the 'B' component tank
goes below the low level sensor, the machine shuts
down. To recover, refill the component tank with mate-
rial to above the low level sensor. When '0' is displayed,
the low level shutdown feature is disabled.
Alarm Engage button
When this button displays '1' and the material level of
either the 'A' component tank or the 'B' component tank
goes below the low level sensor the audible alarm is
activated.
Auto Fill Engage button
When this button displays '1' the automatic filling func-
tion is activated.
313877G
Micrometer PD44 and LRT PD44 Level 1 Control screen shown
Clear Fill Fault button
This button clears the Fill Timer Fault message dis-
played in the corresponding 'A Tank Status' or 'B Tank
Status' field in the Level 1 Control screen.
Silence Alarm button
Press this button to silence the low fluid level audible
alarm. The audible alarm will be activated again when
the low level condition reoccurs.
HMI Operation
23