Management Using The Web Ui; Using The Web Ui To Manage The Nokia Fastmile 4G Receiver; Using The Web Ui Status Screen - Nokia FastMile 4G Product Overview

Nokia FastMile 4G Receiver Product Overview

14 Management using the Web UI

14.1 Using the Web UI to manage the Nokia
After the Nokia FastMile 4G Receiver has been installed, you can use the Web UI to
perform some management-type activities on a Nokia FastMile 4G Receiver that is
managed by an ACS through TR-069. See section
the Web UI.
The Web UI provides the following screens to provide support for management of
the Nokia FastMile 4G Receiver:
•
•
•

14.2 Using the Web UI status screen

The Web UI status screen allows you to view FastMile 4G Receiver status
parameters. No login is required.
The following parameters are shown:
•
•
•
•
•
Issue: 01 DRAFT

14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver

14.2 Using the Web UI status screen
14.3 Using the Web UI network screen
14.4 Using the Web UI system screen
FastMile 4G Receiver
Status screen: allows viewing of FastMile 4G Receiver status parameter values,
see section 14.2
Network screen: allows configuration of specific FastMile 4G Receiver
parameters (login is required), see section
System screen: allows performing of advanced system actions (login is required),
see section 14.4
The attached cell
The Signal Strength of the attached cell: This animated model shows the RSRP
(Reference Signals Received Power) of the attached cell
The RSSI (Received Signal Strength Indication) of the attached cell
The RSRQ (Reference Signal Received Quality) of the attached cell
The SINR (Signal to Interference and Noise Ratio) of the attached cell
3TG-00386-ABAA-TCZZA
14.3
DRAFT
Management using the Web UI
6.1.2 for more information about
95