Esd Safety Guidelines; Environmental Requirements; Additional Information - Nokia FastMile 4G Product Overview

Nokia FastMile 4G Receiver Product Overview
3.4
The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened.
Operations personnel must observe the following ESD instructions when they
handle the Nokia FastMile 4G Receiver equipment.
Service personnel are not required to wear wrist straps when performing normal
installation or maintenance activities.
3.5
See chapter
Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver
specifications.
During operation in the supported temperature range, condensation inside the Nokia
FastMile 4G Receiver equipment caused by humidity is not an issue because the
Nokia FastMile 4G Receiver is a sealed unit.
3.6
See chapter
Issue: 01 DRAFT

ESD safety guidelines

Caution —
This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
4G Receiver.

Environmental requirements

16 in this document for information about temperature ranges for the

Additional information

17 for RF exposure information.
3TG-00386-ABAA-TCZZA
DRAFT
ETSI safety guidelines
19