Nokia FastMile 4G Product Overview page 54

The signal strength LEDs can be activated by pressing the measurement button on
the side of the Compact multi-band models of the Nokia FastMile 4G Receiver.
Figure
Figure 19
The signal strength LEDs act as a set to indicate the LTE signal strength detected
by the Nokia FastMile 4G Receiver. For example, if the signal strength is fourth level,
then LEDs 1, 2, 3, and 4 are lit. The Nokia FastMile 4G Receiver Installation Guide
provides more information about the signal strength LEDs.
LEDs
54
19 shows the location of the measurement button.
Location of the measurement button
Me asu rement bu tton
3TG-00386-ABAA-TCZZA
DRAFT
Nokia FastMile 4G Receiver Product Overview
28885
Issue: 01 DRAFT