Graco Husky 2200 Operation page 4

Warnings
EQUIPMENT MISUSE
EQUIPMENT EQUIPMENT
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated
system component. See Technical
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical
in all equipment manuals. Read fluid and solvent manufacturer's warnings. For complete
information about your material, request MSDS from distributor or retailer.
• Do not leave the work area while equipment is energized or under pressure.
• Turn off all equipment and follow the Pressure
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer's replacement parts only.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals
and create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.
THERMAL EXPANSION EXPANSION HAZARD
THERMAL THERMAL EXPANSION
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure
due to the thermal expansion. Over-pressurization can result in equipment rupture and serious
injury.
• Open a valve to relieve the fluid expansion during heating.
• Replace hoses proactively at regular intervals based on your operating conditions.
PLASTIC PARTS PARTS CLEANING
PLASTIC PLASTIC PARTS
Many solvents can degrade plastic parts and cause them to fail, which could cause serious
injury or property damage.
• Use only compatible water-based solvents to clean plastic structural or pressure-containing
parts.
• See Technical Technical Data Technical
solvent manufacturer's MSDSs and recommendations.
TOXIC FLUID FLUID OR
TOXIC TOXIC FLUID
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin,
inhaled, or swallowed.
• Read MSDSs to know the specific hazards of the fluids you are using.
• Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted into
the air.
• Store hazardous fluid in approved containers, and dispose of it according to applicable
guidelines.
4
WARNING WARNING WARNING
MISUSE HAZARD HAZARD
MISUSE HAZARD
Technical Technical Data Data Data in all equipment manuals.
Pressure Relief
Pressure
HAZARD
HAZARD
CLEANING SOLVENT SOLVENT HAZARD
CLEANING SOLVENT
Data Data in this and all other equipment instruction manuals. Read fluid and
OR FUMES FUMES HAZARD HAZARD
OR FUMES HAZARD
www.northridgepumps.com
Relief Procedure Procedure when equipment is not in use.
Relief Procedure
HAZARD
HAZARD
Technical Data Technical Data Data
3A2578E