Omega OSD607X Instruction Manual page 27

Operating Instructions
Note:
AS/NZS 2007.1: This program is the test cycle. The information for comparability test in accordance with
AS/NZS 2007.1.
Starting A Cycle Wash
1. Close the drawer, press the Power button to switch on the machine.
2. Press the Program button to select the desired program.
3. Press the Start/Pause button, the dishwasher will start its cycle.
Changing The Program Once Started
A wash program can only be changed if it has not been running long. You need to ensure that the wash
water is still present and it has not drained out and began rinsing. Detergent will have to be
re- added if there is no wash water present.
Here are the instructions to change the program:
1. Press the Start/Pause button to pause the washing.
2. Press the Program button for more than 3 seconds, the program will be cancelled.
3. Press the Program button to select the desired program.
4. Press the Start/Pause button, the dishwasher will start.
27