Shock And Vibration; Electromagnetic Compatibility - National Instruments WSN-3226 User Manual And Specifications

Wireless sensor network 4-channel, 20-bit voltage/rtd node
Hide thumbs Also See for WSN-3226:
Table of Contents

Advertisement

Shock and Vibration

Operating vibration, random (IEC 60068-2-64) ....5 g
Operating shock (IEC 60068-2-27) .......................30 g, 11 ms half sine,
Operating vibration,
sinusoidal (IEC 60068-2-6) ...................................5 g, 10 to 500 Hz

Electromagnetic Compatibility

Caution
Electromagnetic interference can adversely affect the measurement accuracy of this
product. The input/output terminals of this device are not protected for electromagnetic interference.
As a result, this device may experience reduced measurement accuracy or other temporary
performance degradation when connected cables are routed in an environment with radiated or
conducted radio frequency electromagnetic interference. To limit radiated emissions and to ensure
that this device functions within specifications in its operational electromagnetic environment, take
precautions when designing, selecting, and installing measurement probes and cables.
This product is designed to meet the requirements of the following standards of EMC for electrical
equipment for measurement, control, and laboratory use:
EN 61326-2-1 (IEC 61326-2-1): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
This product also meets the requirements of the following EMC standards for intentional radiators:
EN 300 328
EN 301 489-1 and EN 301 489-17
FCC 47 CFR Part 15C
IC RSS-210
Note
For EMC certification and additional information, refer to the product label or the Online
Product Certification section.
CE Compliance
This product meets the essential requirements of applicable European Directives, as amended for
CE marking, as follows:
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility (EMC) Directive
1999/5/EC; Radio and Telecommunications Terminal Equipment (R&TTE) Directive
NI WSN-3226 User Guide and Specifications
, 10 to 500 Hz
rms
50 g, 3 ms half sine,
18 shocks at 6 orientations
32
ni.com

Advertisement

Table of Contents
loading

Table of Contents